العربية
🚨 BreakingSonicWall Gen 6 Firewalls Reach End of Security Patches

Danfoss and Copeland Refrigeration Controller Flaws Draw Attacks

فريق السايبر العربياقرأ بالعربية

Researchers found six unpatched flaws in Danfoss AK-SM800A controllers and 14 in Copeland XWEB EVO, with exploit attempts against two Copeland CVEs within hours of disclosure.

Source image for: Danfoss and Copeland Refrigeration Controller Flaws Draw Attacks
Image: The Hacker News

⚡ Why it matters

These controllers run store fridges and freezers, which recent European attacks abused to trigger defrost cycles and spoil stock.

Warnings about commercial refrigeration controllers keep piling up after attacks on French stores from October 11 and a second European wave last week, which triggered unwanted defrost cycles and destroyed stock.

Danfoss AK-SM800A: six unpatched flaws

As reported by The Hacker News, Dutch consultancy Midnight Blue found six flaws in Danfoss AK-SM800A controllers that could let a remote attacker take over a unit without logging in.

  • Researchers say all versions up to 5.3.2 are affected and that the newest release, 5.4.0, does not fix them.
  • Five flaws sit in unauthenticated web request handlers inside a program running as root.
  • The sixth is in the gateway that enforces Strict mode, and it crashed that gateway in emulation.
  • No CVE IDs have been assigned and no fix date has been published.

With root access an attacker could change settings, start defrost cycles and hide the activity from logs. Agencies in Belgium, Ireland and Germany told operators to remove management interfaces from the internet, noting that firmware updates, password changes or Strict mode alone are not enough. Germany's BSI says it has no information on exploitation of these new flaws.

Copeland XWEB EVO: probed within two hours

SecurityWeek reports that VulnCheck disclosed 14 flaws in Copeland XWEB EVO controllers, formerly sold under the Dixell name.

  • Nine affect only firmware predating a 2021 rewrite.
  • Five affect the latest firmware and will not be fixed, because Copeland ended XWEB EVO support on March 16, 2026 and recommends XWEB Pro.
  • Four involve a daily admin password derived from the MAC address and date, while the MAC is exposed without authentication.

The CVE records went live on November 12, and VulnCheck saw the first exploit attempts within two hours against CVE-2026-124014, which allows unauthenticated writes to the system configuration file. On November 13 probes targeted CVE-2026-124010, unauthenticated root command execution. The researcher calls this opportunistic scanning unrelated to the October campaign France attributed to Iran. Onyphe data shows nearly 2,000 XWEB EVO hosts exposed online.

Recommendations

  • Take Danfoss and Copeland management interfaces off the internet entirely and reach them only through a VPN on a segmented network.
  • Copeland XWEB EVO users should plan a move to a supported platform such as XWEB Pro.
  • Danfoss AK-SM800A users should follow vendor and national advisories and apply the fix as soon as it ships.
  • Monitor controller logs and defrost schedules for unexplained changes.

🔗 Sources

This article is original reporting by the Security World editorial team based on the sources listed above; direct quotes are kept short and marked with quotation marks. Corrections and feedback: info [at] securitywd.net.

Related stories